M11

Fields marked with * are obligatory. Other (optional) fields can help you finding errors in your calculations. If you would like to skip other fields, please write: "skip"

Basic data

* Author of the lab. report:
* NEPTUN code:
* Measurement date:

Measured and evaluated measurement data

* Atmospheric pressure at the beginning of the measurement:		[Pa]
* Atmospheric pressure at the end of the measurement:		[Pa]
* Laboratory temperature at the beginning of the measurement:		[K]
* Laboratory temperature at the end of the measurement:		[K]
* height of the measurement section:		[m]
* width of the measurement section:		[m]
* Pressure difference measured for the inlet orifice:		[Pa]
Density of air:		[kg/m³]

Only the values for one given instance should be entered! The values which are entered should be given as if the body were measured all the way around. Make sure to use the same coordinate system as the one given in the measurement guide! The flow approaches the body from the x direction! This is 0°! Don't forget, that for the case of the airfoil, symmetry was taken into account in order to measure the far side of the airfoil!

Number of measurement points (If the body was not measured all the way around, give the number of points referring to the measurement of the entire body.)

* Number of measurement points:

[]

Measurement points

* #1 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #1 measurement point's angle. (give the angle of the surface normal.):		[°]
* #1. width of the section pertaining to the given hole (h).:		[m]
* #2 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #2 measurement point's angle. (give the angle of the surface normal.):		[°]
* #2. width of the section pertaining to the given hole (h).:		[m]
* #3 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #3 measurement point's angle. (give the angle of the surface normal.):		[°]
* #3. width of the section pertaining to the given hole (h).:		[m]
* #4 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #4 measurement point's angle. (give the angle of the surface normal.):		[°]
* #4. width of the section pertaining to the given hole (h).:		[m]
* #5 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #5 measurement point's angle. (give the angle of the surface normal.):		[°]
* #5. width of the section pertaining to the given hole (h).:		[m]
* #6 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #6 measurement point's angle. (give the angle of the surface normal.):		[°]
* #6. width of the section pertaining to the given hole (h).:		[m]
* #7 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #7 measurement point's angle. (give the angle of the surface normal.):		[°]
* #7. width of the section pertaining to the given hole (h).:		[m]
* #8 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #8 measurement point's angle. (give the angle of the surface normal.):		[°]
* #8. width of the section pertaining to the given hole (h).:		[m]
* #9 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #9 measurement point's angle. (give the angle of the surface normal.):		[°]
* #9. width of the section pertaining to the given hole (h).:		[m]
* #10 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #10 measurement point's angle. (give the angle of the surface normal.):		[°]
* #10. width of the section pertaining to the given hole (h).:		[m]
* #11 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #11 measurement point's angle. (give the angle of the surface normal.):		[°]
* #11. width of the section pertaining to the given hole (h).:		[m]
* #12 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #12 measurement point's angle. (give the angle of the surface normal.):		[°]
* #12. width of the section pertaining to the given hole (h).:		[m]
* #13 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #13 measurement point's angle. (give the angle of the surface normal.):		[°]
* #13. width of the section pertaining to the given hole (h).:		[m]
* #14 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #14 measurement point's angle. (give the angle of the surface normal.):		[°]
* #14. width of the section pertaining to the given hole (h).:		[m]
* #15 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #15 measurement point's angle. (give the angle of the surface normal.):		[°]
* #15. width of the section pertaining to the given hole (h).:		[m]
* #16 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #16 measurement point's angle. (give the angle of the surface normal.):		[°]
* #16. width of the section pertaining to the given hole (h).:		[m]
* #17 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #17 measurement point's angle. (give the angle of the surface normal.):		[°]
* #17. width of the section pertaining to the given hole (h).:		[m]
* #18 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #18 measurement point's angle. (give the angle of the surface normal.):		[°]
* #18. width of the section pertaining to the given hole (h).:		[m]
* #19 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #19 measurement point's angle. (give the angle of the surface normal.):		[°]
* #19. width of the section pertaining to the given hole (h).:		[m]
* #20 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #20 measurement point's angle. (give the angle of the surface normal.):		[°]
* #20. width of the section pertaining to the given hole (h).:		[m]
* #21 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #21 measurement point's angle. (give the angle of the surface normal.):		[°]
* #21. width of the section pertaining to the given hole (h).:		[m]
* #22 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #22 measurement point's angle. (give the angle of the surface normal.):		[°]
* #22. width of the section pertaining to the given hole (h).:		[m]
* #23 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #23 measurement point's angle. (give the angle of the surface normal.):		[°]
* #23. width of the section pertaining to the given hole (h).:		[m]
* #24 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #24 measurement point's angle. (give the angle of the surface normal.):		[°]
* #24. width of the section pertaining to the given hole (h).:		[m]
* #25 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #25 measurement point's angle. (give the angle of the surface normal.):		[°]
* #25. width of the section pertaining to the given hole (h).:		[m]
* #26 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #26 measurement point's angle. (give the angle of the surface normal.):		[°]
* #26. width of the section pertaining to the given hole (h).:		[m]
* #27 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #27 measurement point's angle. (give the angle of the surface normal.):		[°]
* #27. width of the section pertaining to the given hole (h).:		[m]
* #28 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #28 measurement point's angle. (give the angle of the surface normal.):		[°]
* #28. width of the section pertaining to the given hole (h).:		[m]
* #29 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #29 measurement point's angle. (give the angle of the surface normal.):		[°]
* #29. width of the section pertaining to the given hole (h).:		[m]
* #30 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #30 measurement point's angle. (give the angle of the surface normal.):		[°]
* #30. width of the section pertaining to the given hole (h).:		[m]
* #31 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #31 measurement point's angle. (give the angle of the surface normal.):		[°]
* #31. width of the section pertaining to the given hole (h).:		[m]
* #32 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #32 measurement point's angle. (give the angle of the surface normal.):		[°]
* #32. width of the section pertaining to the given hole (h).:		[m]
* #33 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #33 measurement point's angle. (give the angle of the surface normal.):		[°]
* #33. width of the section pertaining to the given hole (h).:		[m]
* #34 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #34 measurement point's angle. (give the angle of the surface normal.):		[°]
* #34. width of the section pertaining to the given hole (h).:		[m]
* #35 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #35 measurement point's angle. (give the angle of the surface normal.):		[°]
* #35. width of the section pertaining to the given hole (h).:		[m]
* #36 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #36 measurement point's angle. (give the angle of the surface normal.):		[°]
* #36. width of the section pertaining to the given hole (h).:		[m]
* #37 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #37 measurement point's angle. (give the angle of the surface normal.):		[°]
* #37. width of the section pertaining to the given hole (h).:		[m]
* #38 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #38 measurement point's angle. (give the angle of the surface normal.):		[°]
* #38. width of the section pertaining to the given hole (h).:		[m]
* #39 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #39 measurement point's angle. (give the angle of the surface normal.):		[°]
* #39. width of the section pertaining to the given hole (h).:		[m]
* #40 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #40 measurement point's angle. (give the angle of the surface normal.):		[°]
* #40. width of the section pertaining to the given hole (h).:		[m]
* #41 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #41 measurement point's angle. (give the angle of the surface normal.):		[°]
* #41. width of the section pertaining to the given hole (h).:		[m]
* #42 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #42 measurement point's angle. (give the angle of the surface normal.):		[°]
* #42. width of the section pertaining to the given hole (h).:		[m]
* #43 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #43 measurement point's angle. (give the angle of the surface normal.):		[°]
* #43. width of the section pertaining to the given hole (h).:		[m]
* #44 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #44 measurement point's angle. (give the angle of the surface normal.):		[°]
* #44. width of the section pertaining to the given hole (h).:		[m]
* #45 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #45 measurement point's angle. (give the angle of the surface normal.):		[°]
* #45. width of the section pertaining to the given hole (h).:		[m]
* #46 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #46 measurement point's angle. (give the angle of the surface normal.):		[°]
* #46. width of the section pertaining to the given hole (h).:		[m]
* #47 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #47 measurement point's angle. (give the angle of the surface normal.):		[°]
* #47. width of the section pertaining to the given hole (h).:		[m]
* #48 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #48 measurement point's angle. (give the angle of the surface normal.):		[°]
* #48. width of the section pertaining to the given hole (h).:		[m]
* #49 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #49 measurement point's angle. (give the angle of the surface normal.):		[°]
* #49. width of the section pertaining to the given hole (h).:		[m]
* #50 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #50 measurement point's angle. (give the angle of the surface normal.):		[°]
* #50. width of the section pertaining to the given hole (h).:		[m]
* #51 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #51 measurement point's angle. (give the angle of the surface normal.):		[°]
* #51. width of the section pertaining to the given hole (h).:		[m]
* #52 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #52 measurement point's angle. (give the angle of the surface normal.):		[°]
* #52. width of the section pertaining to the given hole (h).:		[m]
* #53 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #53 measurement point's angle. (give the angle of the surface normal.):		[°]
* #53. width of the section pertaining to the given hole (h).:		[m]
* #54 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #54 measurement point's angle. (give the angle of the surface normal.):		[°]
* #54. width of the section pertaining to the given hole (h).:		[m]
* #55 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #55 measurement point's angle. (give the angle of the surface normal.):		[°]
* #55. width of the section pertaining to the given hole (h).:		[m]
* #56 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #56 measurement point's angle. (give the angle of the surface normal.):		[°]
* #56. width of the section pertaining to the given hole (h).:		[m]
* #57 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #57 measurement point's angle. (give the angle of the surface normal.):		[°]
* #57. width of the section pertaining to the given hole (h).:		[m]
* #58 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #58 measurement point's angle. (give the angle of the surface normal.):		[°]
* #58. width of the section pertaining to the given hole (h).:		[m]
* #59 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #59 measurement point's angle. (give the angle of the surface normal.):		[°]
* #59. width of the section pertaining to the given hole (h).:		[m]
* #60 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #60 measurement point's angle. (give the angle of the surface normal.):		[°]
* #60. width of the section pertaining to the given hole (h).:		[m]
* #61 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #61 measurement point's angle. (give the angle of the surface normal.):		[°]
* #61. width of the section pertaining to the given hole (h).:		[m]
* #62 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #62 measurement point's angle. (give the angle of the surface normal.):		[°]
* #62. width of the section pertaining to the given hole (h).:		[m]
* #63 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #63 measurement point's angle. (give the angle of the surface normal.):		[°]
* #63. width of the section pertaining to the given hole (h).:		[m]
* #64 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #64 measurement point's angle. (give the angle of the surface normal.):		[°]
* #64. width of the section pertaining to the given hole (h).:		[m]
* #65 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #65 measurement point's angle. (give the angle of the surface normal.):		[°]
* #65. width of the section pertaining to the given hole (h).:		[m]
* #66 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #66 measurement point's angle. (give the angle of the surface normal.):		[°]
* #66. width of the section pertaining to the given hole (h).:		[m]
* #67 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #67 measurement point's angle. (give the angle of the surface normal.):		[°]
* #67. width of the section pertaining to the given hole (h).:		[m]
* #68 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #68 measurement point's angle. (give the angle of the surface normal.):		[°]
* #68. width of the section pertaining to the given hole (h).:		[m]
* #69 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #69 measurement point's angle. (give the angle of the surface normal.):		[°]
* #69. width of the section pertaining to the given hole (h).:		[m]
* #70 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #70 measurement point's angle. (give the angle of the surface normal.):		[°]
* #70. width of the section pertaining to the given hole (h).:		[m]
* #71 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #71 measurement point's angle. (give the angle of the surface normal.):		[°]
* #71. width of the section pertaining to the given hole (h).:		[m]
* #72 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #72 measurement point's angle. (give the angle of the surface normal.):		[°]
* #72. width of the section pertaining to the given hole (h).:		[m]
* #73 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #73 measurement point's angle. (give the angle of the surface normal.):		[°]
* #73. width of the section pertaining to the given hole (h).:		[m]
* #74 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #74 measurement point's angle. (give the angle of the surface normal.):		[°]
* #74. width of the section pertaining to the given hole (h).:		[m]
* #75 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #75 measurement point's angle. (give the angle of the surface normal.):		[°]
* #75. width of the section pertaining to the given hole (h).:		[m]
* #76 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #76 measurement point's angle. (give the angle of the surface normal.):		[°]
* #76. width of the section pertaining to the given hole (h).:		[m]
* #77 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #77 measurement point's angle. (give the angle of the surface normal.):		[°]
* #77. width of the section pertaining to the given hole (h).:		[m]
* #78 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #78 measurement point's angle. (give the angle of the surface normal.):		[°]
* #78. width of the section pertaining to the given hole (h).:		[m]
* #79 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #79 measurement point's angle. (give the angle of the surface normal.):		[°]
* #79. width of the section pertaining to the given hole (h).:		[m]
* #80 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #80 measurement point's angle. (give the angle of the surface normal.):		[°]
* #80. width of the section pertaining to the given hole (h).:		[m]
* #81 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #81 measurement point's angle. (give the angle of the surface normal.):		[°]
* #81. width of the section pertaining to the given hole (h).:		[m]
* #82 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #82 measurement point's angle. (give the angle of the surface normal.):		[°]
* #82. width of the section pertaining to the given hole (h).:		[m]
* #83 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #83 measurement point's angle. (give the angle of the surface normal.):		[°]
* #83. width of the section pertaining to the given hole (h).:		[m]
* #84 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #84 measurement point's angle. (give the angle of the surface normal.):		[°]
* #84. width of the section pertaining to the given hole (h).:		[m]
* #85 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #85 measurement point's angle. (give the angle of the surface normal.):		[°]
* #85. width of the section pertaining to the given hole (h).:		[m]
* #86 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #86 measurement point's angle. (give the angle of the surface normal.):		[°]
* #86. width of the section pertaining to the given hole (h).:		[m]
* #87 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #87 measurement point's angle. (give the angle of the surface normal.):		[°]
* #87. width of the section pertaining to the given hole (h).:		[m]
* #88 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #88 measurement point's angle. (give the angle of the surface normal.):		[°]
* #88. width of the section pertaining to the given hole (h).:		[m]
* #89 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #89 measurement point's angle. (give the angle of the surface normal.):		[°]
* #89. width of the section pertaining to the given hole (h).:		[m]
* #90 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #90 measurement point's angle. (give the angle of the surface normal.):		[°]
* #90. width of the section pertaining to the given hole (h).:		[m]
* #91 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #91 measurement point's angle. (give the angle of the surface normal.):		[°]
* #91. width of the section pertaining to the given hole (h).:		[m]
* #92 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #92 measurement point's angle. (give the angle of the surface normal.):		[°]
* #92. width of the section pertaining to the given hole (h).:		[m]
* #93 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #93 measurement point's angle. (give the angle of the surface normal.):		[°]
* #93. width of the section pertaining to the given hole (h).:		[m]
* #94 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #94 measurement point's angle. (give the angle of the surface normal.):		[°]
* #94. width of the section pertaining to the given hole (h).:		[m]
* #95 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #95 measurement point's angle. (give the angle of the surface normal.):		[°]
* #95. width of the section pertaining to the given hole (h).:		[m]
* #96 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #96 measurement point's angle. (give the angle of the surface normal.):		[°]
* #96. width of the section pertaining to the given hole (h).:		[m]
* #97 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #97 measurement point's angle. (give the angle of the surface normal.):		[°]
* #97. width of the section pertaining to the given hole (h).:		[m]
* #98 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #98 measurement point's angle. (give the angle of the surface normal.):		[°]
* #98. width of the section pertaining to the given hole (h).:		[m]
* #99 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #99 measurement point's angle. (give the angle of the surface normal.):		[°]
* #99. width of the section pertaining to the given hole (h).:		[m]
* #100 measurement point's pressure difference (pbody-pstatic):		[Pa]
* #100 measurement point's angle. (give the angle of the surface normal.):		[°]
* #100. width of the section pertaining to the given hole (h).:		[m]
* #1 measurement point's cp value:		[]
* #2 measurement point's cp value:		[]
* #3 measurement point's cp value:		[]
* #4 measurement point's cp value:		[]
* #5 measurement point's cp value:		[]
* #6 measurement point's cp value:		[]
* #7 measurement point's cp value:		[]
* #8 measurement point's cp value:		[]
* #9 measurement point's cp value:		[]
* #10 measurement point's cp value:		[]
* #11 measurement point's cp value:		[]
* #12 measurement point's cp value:		[]
* #13 measurement point's cp value:		[]
* #14 measurement point's cp value:		[]
* #15 measurement point's cp value:		[]
* #16 measurement point's cp value:		[]
* #17 measurement point's cp value:		[]
* #18 measurement point's cp value:		[]
* #19 measurement point's cp value:		[]
* #20 measurement point's cp value:		[]
* #21 measurement point's cp value:		[]
* #22 measurement point's cp value:		[]
* #23 measurement point's cp value:		[]
* #24 measurement point's cp value:		[]
* #25 measurement point's cp value:		[]
* #26 measurement point's cp value:		[]
* #27 measurement point's cp value:		[]
* #28 measurement point's cp value:		[]
* #29 measurement point's cp value:		[]
* #30 measurement point's cp value:		[]
* #31 measurement point's cp value:		[]
* #32 measurement point's cp value:		[]
* #33 measurement point's cp value:		[]
* #34 measurement point's cp value:		[]
* #35 measurement point's cp value:		[]
* #36 measurement point's cp value:		[]
* #37 measurement point's cp value:		[]
* #38 measurement point's cp value:		[]
* #39 measurement point's cp value:		[]
* #40 measurement point's cp value:		[]
* #41 measurement point's cp value:		[]
* #42 measurement point's cp value:		[]
* #43 measurement point's cp value:		[]
* #44 measurement point's cp value:		[]
* #45 measurement point's cp value:		[]
* #46 measurement point's cp value:		[]
* #47 measurement point's cp value:		[]
* #48 measurement point's cp value:		[]
* #49 measurement point's cp value:		[]
* #50 measurement point's cp value:		[]
* #51 measurement point's cp value:		[]
* #52 measurement point's cp value:		[]
* #53 measurement point's cp value:		[]
* #54 measurement point's cp value:		[]
* #55 measurement point's cp value:		[]
* #56 measurement point's cp value:		[]
* #57 measurement point's cp value:		[]
* #58 measurement point's cp value:		[]
* #59 measurement point's cp value:		[]
* #60 measurement point's cp value:		[]
* #61 measurement point's cp value:		[]
* #62 measurement point's cp value:		[]
* #63 measurement point's cp value:		[]
* #64 measurement point's cp value:		[]
* #65 measurement point's cp value:		[]
* #66 measurement point's cp value:		[]
* #67 measurement point's cp value:		[]
* #68 measurement point's cp value:		[]
* #69 measurement point's cp value:		[]
* #70 measurement point's cp value:		[]
* #71 measurement point's cp value:		[]
* #72 measurement point's cp value:		[]
* #73 measurement point's cp value:		[]
* #74 measurement point's cp value:		[]
* #75 measurement point's cp value:		[]
* #76 measurement point's cp value:		[]
* #77 measurement point's cp value:		[]
* #78 measurement point's cp value:		[]
* #79 measurement point's cp value:		[]
* #80 measurement point's cp value:		[]
* #81 measurement point's cp value:		[]
* #82 measurement point's cp value:		[]
* #83 measurement point's cp value:		[]
* #84 measurement point's cp value:		[]
* #85 measurement point's cp value:		[]
* #86 measurement point's cp value:		[]
* #87 measurement point's cp value:		[]
* #88 measurement point's cp value:		[]
* #89 measurement point's cp value:		[]
* #90 measurement point's cp value:		[]
* #91 measurement point's cp value:		[]
* #92 measurement point's cp value:		[]
* #93 measurement point's cp value:		[]
* #94 measurement point's cp value:		[]
* #95 measurement point's cp value:		[]
* #96 measurement point's cp value:		[]
* #97 measurement point's cp value:		[]
* #98 measurement point's cp value:		[]
* #99 measurement point's cp value:		[]
* #100 measurement point's cp value:		[]
Average velocity, calculated from the reference pressure:		[m/s]
* Drag force:		[N]
* Drag coefficient (absolute value):		[]